West Indiachemicals is one of the most promising manufacturers & suppliers of manufacturers & suppliers of METAL BRITE - RXSOL-16-1011-025 in Kandla, Gandhidham, Mundra, Sikka, Jamnagar, Surat in India , Gulf , Singapore and Also UAE
Specially designed for removal of rust from any steel surface area also acts as rust proofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
Metal Brite is Highly concentrated cleaning liquid, needs to be diluted with water in a plastic jar and not vice versa before use . It is non-flammable. Prevents further rusting.
Specially designed for removal of rust from any steel surface area and rust stain from Brass , Copper , S.S , wood , ceramic and aluminium surfaces , painted or not . And act as surface brightner. Also acts as rust proofing agent before the application of paint or coatings
For removal of heavy rust stains should applied in full concentration and kept for 15-20 mins.
After the elapsed time , surface needs to be wased with ample water.
For polishing almost all metals, such as brass, copper, nickel, chrome, stainless steel, aluminium and even for machinery and golf clubs.
Product pack size:
250 Ml, 1 Ltr / 5 / 10 / 25 / 35 / 210 Ltr Discount is not applicable for small packing.
Product alias:
METAL Bright, P3 T1166, NALCO NALFLEET 79112, Formula 4, ETR 300, Eazy RSR
NOTE :-
For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat Metal Bright- Rx and allow to dry. Second wash may be necessary. Surface should have a grey/white appearance when the Metal Bright- Rx is dry. Steel surfaces will have a resistance to rust and will render a good base for paint.For removal of rust stains on painted surfaces and wood, Metal Bright Rx should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.
Spraying Direction :-
Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of Metal Bright Rx This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the Metal Bright Rx will show up in a Wall Wash.
Injection – Not suitable.
Re-circulation :–
When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.
* If the mixture is allowed to overheat, it will soften epoxy / phenolic coating.
* Use a strainer at the pumpstack when circulating any solution.
> Tank Lining – Stainless / Epoxy, Phenolic
Product specification of bird-pigeon-repellent-gel for your reference are available through this link
http://westindiachemical.com/product/metal-brite
We also have ready stock available . We commit you the best quality, huge quantity and fast delivery time.
Please feel free to contact us on Email westindiachemicals@gmail.com
